| |
|
|
|
| |
LIGHT DUTY UPRIGHT MODELS
|
Light Duty upright models, with available capacities from 30 to 120 gallons, are the perfect choice for many moderate commercial applications. They also serve well in selected residential installations. Upright models are field convertible from three phase to single phase and/or from non-simultaneous to simultaneous operation.
(Sample model numbers include: LD-30R3-3 & LD-80R3-3)
- Fully automatic controls
- Direct heat transfer with immersed elements
- Terminal Block
- Field Convertible
- Factory installed heat traps
- Protective magnesium anode rod
- Vitraglas® lining
- Factory installed dielectric waterway fittings
- Factory installed T&P valve
- Brass drain valve
- Three year limited warranty on Steel tank
- One year limited warranty on parts
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
LIGHT DUTY UTILITY MODELS
|
These small but powerful units fit just about any location. Available from six to 30 gallons, they fill the bill when space is at a premium.
(Sample model numbers include: LD-12UT3-1 & LD-30U3-1)
- Fully automatic controls.
- Direct heat transfer with immersed elements
- Terminal Block
- Field Convertible
- Factory installed heat traps
- Protective magnesium anode rod
- Vitraglas® lining
- Factory installed dielectric waterway fittings
- Factory installed T&P valve
- Brass drain valve
- Three year limited warranty on Steel tank
- One year limited warranty on parts
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
LIGHT DUTY LOWBOY MODELS
|
Power in a short package is what you get with these convenient commercial electrics. TheyÆre perfect for under counter installations. The double element Lowboy models are field convertible from three phase to single phase and/or from non-simultaneous to simultaneous operation.
(Sample model numbers include: LD-20L3-3 & LD-30L3-3)
- Fully automatic controls.
- Direct heat transfer with immersed elements
- Terminal Block
- Field Convertible
- Factory installed heat traps
- Protective magnesium anode rod
- Vitraglas® lining
- Factory installed dielectric waterway fittings
- Factory installed T&P valve
- Brass drain valve
- Three year limited warranty on Steel tank
- One year limited warranty on parts
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
LIGHT DUTY WALL HUNG MODELS
|
When floor space is at a premium and you need hot water in a commercial application, the Light Duty Wall Hung models are the answer. Equipped with a factory installed mounting bracket, these water heaters offer bottom water connections for easy installation.
(Sample model numbers include: LD-WH12U3 & LD-WH30L3)
- Fully automatic controls.
- Direct heat transfer with immersed elements
- Terminal Block
- Field Convertible
- Factory installed heat traps
- Protective magnesium anode rod
- Vitraglas® lining
- Factory installed dielectric waterway fittings
- Factory installed T&P valve
- Brass drain valve
- Three year limited warranty on Steel tank
- One year limited warranty on parts
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
DAIRY BARN MODELS
|
This product was developed in response to the challenge of locating a water heater in a dairy barn. A higher floor clearance allows for easy cleaning, enabling this unit to meet installation requirements of the dairy industry.
(Model number: DB-80R3DS)
- Full automatic controls
- Direct heat transfer with immersed elements
- 4" leg kit
- Hydrojet® Total Performance System
- Vitraglas® lined tank
- Factory installed T&P valve
- Brass drain valve
- 3 year limited tank warranty
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
MEDIUM DUTY 3-ELEMENT MODELS
|
The new 3-Element Medium Duty models are design certified by UL for field conversions. This added benefit allows for easy, on-the-job-site conversions of kW inputs, voltages and wire phases. These new units are available in gallon capacities of 50, 80 and 119 with factory inputs ranging from 6-18 kW and provide the added input required by medium duty commercial applications such as beauty salons, fast food restaurants and office buildings.
(Sample model numbers include: E32-50S-3 & E32-120R-3)
- Fully automatic controls
- Direct heat transfer with immersed elements
- Factory installed Hydrojet® Total Performance System
- Vitraglas® lining
- Factory installed dielectric waterway fittings
- Protective magnesium rod
- Factory installed T&P relief valve
- Three year limited warranty on Steel tank
- Brass drain valve
- One year limited warranty on parts
- 2" Non-CFC foam insulation
|
|
| |
|
|
|
| |
ENERGY SAVER IMMERSION THERMOSTAT WITH CONTACTORS MODELS
|
MII Energy Saver Immersion Thermostat models set the standard in commercial electric water heaters. They're available in an assortment of capacities, inputs and first hour deliveries so professionals have the solutions to any challenge. Unprecedented standard features like Hydrojet® Sediment Reduction System ensures long lasting, top performance.
(Sample model numbers include: M-II-50-KW-3 & M-II-120-KW-3)
- Completely pre-wired with pressure lug terminal or fuse block eliminating the need for splicing or taping wires
- Immersion type thermostat for accurate temperature control from positive off to 180°F
- Dual anodic protection against galvanic corrosion
- NSF construction available on immersion and surface thermostats
- Commercial Hydrojet® Sediment Reduction System
- Hand hole cleanout opening
- Vitraglas® lined tank
- Factory installed 3/4" T&P valve
- Brass drain valve
- 3" Non-CFC foam insulation
|
|
| |
|
|
|
| |
ENERGY SAVER SURFACE MOUNT THERMOSTAT MODELS
|
Our MII Energy Saver Surface Mount Thermostat models are the tried and true workhorses of commercial electric water heating. Available in 50, 80 and 120 gallon capacities, they offer varied inputs and First Hour Delivery ratings capacities. Unprecedented standard features like Hydrojet® Sediment Reduction System ensures long lasting, top performance.
(Sample model numbers include: M-II-50-KW-3 & M-II-120-KW-3)
- Completely pre-wired with pressure lug terminal or fuse block eliminating the need for splicing or taping wires
- Thermostat step control can be accomplished by variable settings
- Low temperature thermostat available (Range 80°F to 140°F)
- Dual anodic protection against galvanic corrosion
- NSF construction available on immersion and surface thermostats
- Commercial Hydrojet® Sediment Reduction System
- Vitraglas® lined tank
- Hand hole cleanout opening
- Factory installed 3/4" T&P valve
- Brass drain valve
- 3" Non-CFC foam insulation
|
|
| |
|
|
|
| |
ENERGY SAVER ASME IMMERSION THERMOSTAT
|
ASME Energy Saver models are constructed to the ASME Code Section IV, Part HLW for lined water heaters that are intended for supplying potable hot water to commercial and industrial applications.
(Sample model numbers include: 6A-KW-3 & 50A-KW-3)
- Immersion Thermostat for accurate temperature control from positive off up to 180°F
- Completely pre-wired with pressure lug terminal or fuse block
- ASME code construction
- Low water cut-off switch
- Safety door interlock
- High and low pressure limit switches
- Alarm horn
- T&P gauge
- Time delay step sequences
- NSF construction
- Anodic Protection against galvanic corrosion
- Factory Installed Commercial Hydrojet® Sediment Reduction System
- Vitraglas® lined tank
- Hand-hole cleanout opening
- Factory installed dielectric fittings
- Factory installed 3/4" T&P valve
- Brass drain valve
- 3" Non-CFC foam insulation
|
|
| |
|
|
|
| |
BOOSTER MODELS
|
Booster water heaters, with their 100% efficiency rating, are the most economical way for raising rinse water temperatures to the required 180°F. These units are the ideal companion for the largest commercial dish washers because of their under the counter design.
(Sample model numbers include: L-I-6-12-3CF & L-I-54-3CF)
- Instantaneous response; continuous 180°F water for dishwashing
- Heavy gauge, glass-lined Steel tank 150 lb. WP; 300 lb. test
- Replaceable cooper-sheathed, tin-coated, low watt density elements
- 6" legs are furnished
- Pilot switch; pilot light; hi-limit control
- Attractive stainless steel front control cover
- Temperature/Pressure gauge
- Immersion thermostat and hi-limit
- Magnetic contractor
- ASME T&P valve
- Magnesium anode rod
- Low cost operation
- Meets National Electric Code fusing requirements
- Full 2" blanket insulation
|
|
| |
|
|
|
| |
BRUTE VERTICAL ROUND MODELS
|
Electric Brutes are the solution to applications calling for an electric unit that will meet the largest demands for hot water. Vertical round units offer capacities from 150 to 1,000 gallons.
[Sample model numbers include: VR250-(KW) & VR800-(KW)]
- Magnetic contactors with immersion thermostats
- Low watt density Incoloy elements
- Internal fusing
- Terminal block connections
- 180°F operation
- Galvanized jacket
- Full-length hinged door with key lock
- Magnesium tank saver
- Meets ASHRAE 90.1b 1992 standard for minimizing heat loss
- Glass-lined tank
- Hand hole cleanout
- UL listed
- T&P valve
- Three-year limited warranty
|
|
| |
|
|
|
| |
BRUTE VERTICAL SQUARE & HORIZONTAL SQUARE MODELS
|
Horizontal square and vertical square Electric Brutes models produce an amazing amount of hot water quickly. The two different profiles, vertical and horizontal accommodate various installation configurations.
(Sample model numbers include:V250-(KW), V800-(KW), H500-(KW) & H2500-(KW)])
|
|
| |
|
|
|